In the following sections you'll learn more about the features of xindy. We'll show you how you can define your own location classes, specify the letter groups in more detail and bring you close to more specfic markup features. After reading this chapter you should be able to master about 95% of the commonly used indexes.
We continue using a more complex index. Copy the current style to a
new file (now style2.xdy) and run xindy on the raw index
ex2.raw by typing:
eg$ cp style1.xdy style2.xdy
eg$ xindy -l ex2.xlg style2.xdy ex2.raw
You should see some error messages indicating that something is unknown to xindy. What has happend? The messages should be similar to the following snapshot:
...
WARNING:
location-reference "B-5" did not match any location-class! (ignored)
WARNING:
location-reference "C-8" did not match any location-class! (ignored)
WARNING:
location-reference "iv" did not match any location-class! (ignored)
WARNING:
location-reference "ii" did not match any location-class! (ignored)
...
The index contains new, and therefore unknown, location classes. The first one has an appendix-like style, whereas the second one seems to be lowercase roman numerals. xindy reported, that it doesn't know these locations and therefore knows nothing about their internal structure. We make them known to the system by adding the following commands to the style file.
(define-location-class "roman-pages" ("roman-numerals-lowercase"))
(define-location-class "appendices" ("ALPHA" :sep "-" "arabic-numbers"))
(define-location-class-order ("roman-pages" "appendices"))
The first command tells xindy that there exist some page numbers
that are written with roman lowercase letters. The second one defines
the structure of the appendix locations. They consist of three
elements, a capital letter, a separator---which is a hyphen in our
case---and finally an arabic number. To be able to correctly
distinguish separator strings from the names of the known
basetypes, the argument :sep indicates, that the following
is a separator. The last command simply says that the locations which
are roman numerals shall appear before the appendix locations. So far
we know three different basetypes. The built-in basetypes of
xindy are:
arabic-numberscontains all non-negative numbers beginning with zero: 0, 1, 2, ....
roman-numerals-uppercase, roman-numerals-lowercasethe roman numerals I, II, III, (IIII/IV), V, ... It contains the old and new roman numeral system. Two versions for uppercase and lowercase letters are supported.
ALPHA, alphaThe US-ASCII alphabet letters (uppercase and lowercase letters).
digitsthe digits 0, 1, 2, 3, 4, 5, 6, 7, 8 and 9 in this order.
`Fine,', you'll say, `but what if my basetypes are completely different?' You're right! But xindy offers you to define your own alphabets. For example, you can define a new alphabet by writing
(define-alphabet "my-personal-alphabet" ("Hi" "ho" "here" "I" "go"))
This is a valid alphabet that consists of 5 letters. You can now define a location class
(define-location-class "my-personal-class"
("my-personal-alphabet" :sep "-" "arabic-numbers"))
to match all of the following locations: Hi-12, ho-2, here-709, I-9, go-42. xindy will recognize them and be able to sort them according to your specification which says that Hi comes before all others and here is exactly at the third position. So they will be sorted lexicographically, layer by layer, until it can decide which one is before or after the other. We have prepared a concrete example. Do you remember the example we gave when we spoke about indexing bible verses? This exactly matches the situation of such a self-defined alphabet which could look like the following definitions:
(define-alphabet "bible-chapters"
("Genesis" "Exodus" "Leviticus" "Numbers" "Deuteronomy"
... ))
(define-location-class "bible-verses"
("bible-chapters" :sep " " "arabic-numbers" :sep "," "arabic-numbers"))
This description would match locations like Genesis 1,3, Exodus 7,8, etc.
Now run LaTeX on ex2.tex and view the results. It looks a
little bit strange since xindy has automatically built ranges of
successive locations. The first locations of the index entry roman
actually denote the range ii until iv. Ranges consist
of location references. To typeset them correctly you can specify
(markup-range :sep "--")
This indicates that location reference forming a range shall be separated by a hyphen. Running xindy and LaTeX again gives a better idea of how it should look like. Here is a part of the generated output.
...
\item appendices\quad{}A-1, A-7, A-11, B-3--B-5, C-1, C-8, C-12,
C-13, C-22, D-2, D-3, D-5, D-10
...
Somehow a lot of space is wasted when looking at the first index entry. Modify the definition of the location class for appendices as follows and add the other commands as well:
(define-location-class "appendices"
("ALPHA" :sep "-" "arabic-numbers")
:hierdepth 2)
(markup-locref-list :sep "; " :depth 0 :class "appendices")
(markup-locref-list :open "~~" :sep ", " :depth 1 :class "appendices")
Note: Since the tilde character serves as our quoting character it
must be quoted itself in the above example. Run xindy and view
the output stored in ex2.ind. The output looks similar to the
following:
...
\item appendices\quad{}A~1, 7, 11; B~3--5; C~1, 8, 12, 13, 22;
D~2, 3, 5, 10
...
You can see that the location references of this class have been
transformed into a hierarchical structure caused by the
:hierdepth argument. Additionally we have specified markup for
the layers of this class separately for the depths 0 and 1. The
locations at depth 0 are separated by a `;' whereas the ones at depth
1 are separated by a `,'.
Maybe you get an impression why we named xindy a flexible system.
More problems arise when using languages with different letter schemes. Hungarian is an example. In Hungarian indexes the words beginning with the letters Cs, Ly, Ny and more are printed in a separate block. The words beginning with Ly, for example, appear behind the words beginning with an L. xindy allows to define this kind of letter groups as well. Add the following lines to the style file.
(define-letter-group "ly" :after "l" :before "m")
(define-letter-group "ny" :after "n" :before "o")
(markup-letter-group :open-head "~n {\bf " :close-head "}"
:capitalize)
The result looks like the following:
...
{\bf Ly}
\item lyuk\quad{}1
\item lyukas\quad{}2
\indexspace
{\bf M}
\item maga\quad{}1
\item magyar\quad{}2
\indexspace
{\bf N}
\item nagy\quad{}1
\item nagyon\quad{}9
\item nègy\quad{}4
\indexspace
{\bf Ny}
\item nyelv\quad{}1
\item nyolc\quad{}8
...
The result describes what the purpose of the above commands is. It becomes prettier from step to step, doesn't it?
You have now learned most of the features of xindy. Go playing around a little bit. For a detailed description of all commands and all their arguments and switches you should reference the manual that comes with this distribution.